American Standard 2774.018WC Hot Tub User Manual


 
H55
© 2008 AS America Inc.
CADET™ 6' x 42"
WHIRLPOOL AND BATHING POOL
HIGH GLOSS
Revised 2/08
CADET™ 6' X 42" WHIRLPOOL AND
BATHING POOL
2774.018W Whirlpool featuring System I
• Acrylic with berglass reinforcement
• Pre-leveled tub bottom
• Form-tted backrest position
• Dual, molded in arm rests
• 2.1 HP single speed, self-draining pump/motor
• Factory installed power cord with plug
• Eight multi-directional and ow-adjustable
jets including:
- Two Ideal-ow jets
- Four body massage jets
- Two recessed back-rest jets
• Deck-mounted air switch On/Off
• Two silent air volume controls
• Quick Connect Safe-T-Heater
connection system
• Factory installed and tested whirlpool system
2774.018WC EverClean
®
Whirlpool
Featuring System I:
• Same as 2774.018W except with the
EverClean System
2774.002 Bathing Pool only
Nominal Dimensions:
1829 x 1067 x 502mm
(72" x 42" x 19-3/4")
Compliance Certications -
Meets or Exceeds the Following Specications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
American Standard whirlpools and air baths with
EverClean
®
incorporate a patented silver-ion
additive right into the circulation piping to protect
the pipes from mold, mildew, algae and fungus that
could cause deterioration or staining of the pipes.
SEE REVERSE FOR PRODUCT DIMENSIONS
AND SPECIFICATIONS
To Be Specied - Required:
Color:
Bath Filler: (specify nish)
Bath Drain: 1583.470 (specify nish)
To Be Specied - Optional:
Safe-T-Heater*: 9075.120
6 Foot Acrylic Apron: 9372.018 (specify color)
6 Foot Apron: 9272.018 (specify color)
Jet Trim Ring Kit: 9860.200-two per kit (specify nish)
for Body Massage Jets only
Universal Tile Bead Kit: 751755-100
Grab Bar Kit: 9822.200-two per kit (specify nish)
For color/nish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
* NOTE: the Safe-T-Heater is designed to maintain water
temperature during operation. It will not heat cold water to
desired bathing temperature.