American Standard 2422LA Hot Tub User Manual


  Open as PDF
of 2
 
HD-12
© 2007 American Standard Inc.
LIFETIME™ AIR SPA
WHIRLPOOLS BY AMERICAN STANDARD
HIGH GLOSS ACRYLICv
Revised 7/07
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION.
SUPPORT OF BATH BY SUMP BEDDING. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.
■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaet.
60"
(1524mm)
32"
(813mm)
32"
(813mm)
3"
(76mm)
6"
(152mm)
13-3/4"
(349mm)
11"
(279mm)
7-3/4"
(197mm)
20"(C)
(502mm)
21-1/2"(H)
(546mm)
C/L OF
OVERFLOW
20-1/8"(A)
(511mm)
DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE
OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7.
CUT OUT IN FLOOR
FOR DRAIN
60 x 32 x 21-1/2 In.
(1524 x 813 x 546mm)
74 Lbs. (34 Kg.)
690 Lbs. (313 Kg.)
74 Gal. (280 L)
33 Gal. (125 L)
41-1/4 x 22-1/4 In. (1048 x 565mm)
52-1/4 X 26 In. (1327 x 660mm)
18-1/2 In. (470mm)
52 Lbs./Sq.Ft. (253 Kgs./Sq.m)
GENERAL SPECIFICATIONS FOR 2422 BATHING POOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
WHIRLPOOL ELECTRICAL SPECIFICATIONS
1.25 HP, 9.7 AMPS, 120V.PUMP
 previous