14
Operating instructions US
4.6 End of operation
Turn to position 0
Never detach the high pressue hose while
the machine is in operation = Position 1, 2
or 1+2.
Danger of scalding!
Never detach high pressure hoses at a
water temperature above 120°F
To stop the machine turn the red start/stop knob (1) to position 0.
Close the shut-off cock of the water inlet (pos. 2) and activate spray lance or high pressure cock to relieve
the pipeline / high pressure hose of pressure.
4.7 Operating environment - installation
The system should be installed in a frost-free room. Pipelines and outlet points should also be protected.
It should be possible to drain outdoor outlet points if they are exposed to frost. Min. room temp. = 36°F.
Max. room temp. = 104°F.
IMPORTANT: Hoses, spray handle, lances and other accessories should always be thawed prior to use.
2
1+2
O
1
KSA-2
KSA-1
O
Start
1
0D[ LQ
0LQ
LQ
0D[ ›)
0LQ ›)
0LQ LQ
0D[
0LQ
›)
›)