Filter
Top Products
CLARKE TECHNOLOGY Operator's Manual -
SCRUBTEC 770 / 784 / 795SCRUBTEC 770 / 784 / 795
SCRUBTEC 770 / 784 / 795SCRUBTEC 770 / 784 / 795
SCRUBTEC 770 / 784 / 795 - 27 -
MAINTENANCE
Adjusting Squeegee Blades
When properly installed the front blade should be ap-
proximately .06 above the rear blade. See figure #29.
Adjusting Squeegee Support Wheels:
The support wheels should be set at .12 above the floor
with the rear blade touching the floor. See figure #31.
WARNING: Maintenance and repairs
must be done by author-
ized personnel only .
WARNING: Electrical repairs must be
done by authorized per-
sonnel only.
Consult your ALTO Authorized Service Person to do
the service procedures.
Use only genuine ALTO parts.
How to Clean the Solution Line
If the solution line becomes clogged, pull the filter
assembly out from behind the brush housing (Figure
#30 and remove the filter screen (Figure # 31) and
clean or replace it. Push filter assembly back inside
frame.
Figure #29
Figure #30
Figure #31
.12