Filter
Top Products
SAFETY
SB5/6 03/09 Safety Section 1-16
© 2009 Alamo Group Inc.
SAFETY
DANGER! Crushing and Pinch Points.
Moving machiney parts can pinch or crush or fall-
which may cause injury or death.
P/N 02962765
CAUTION! Not a step, keep hands and feet off
machine.
P/N 0614500
IMPORTANT - Inspect knife to ledger plate
clearance daily. Poor cutting performance will
result if proper clearance is not maintained. Refer
to operators manual for adjustment.
02970354
INFORMATION - To prevent premature hydraulic
component failure, do not over speed the engine.
When using the mower attachment, operate tractor
at the engine speed which will deliver 540 PTO
RPM on Tachometer. Over speeding the engine
and pump when operating the mower will overheat
and rapidly ruin the oil which will decrease the life
of the hydraulic components.
P/N 02965093