Filter
Top Products
ASSEMBLY
260/272/284 01/11 Assembly Section 3-7
© 2011 Alamo Group Inc.
ASSEMBLY
HYDRAULIC OR MANUAL LIFT (Model 284 Only)
Install the Hydraulic Cylinder or the manual Ratchet Lift Screw (Asm-0039) between the Axle Center Lug and
the Lug directly behind the Center Gearbox. Install cylinder pins provided and retain with cotter pins. NOTE:
Figure ASM-0038 shows optional spring shock installation.
WHEELS (Model 284 Only)
Install the Wheels on the Wheel Hubs. Note: If Laminated Tires are used, place the flat side of the Lug Nut
against the Wheel Asm-R-0127. Note direction of travel and curvature of rubber segments in tire and install as
shown in Asm-R-0127.