Filter
Top Products
MAINTENANCE
MACHETE 2 11/08 Maintenance Section 4-4
©2008 Alamo Group Inc.
MAINTENANCE
TANK FILL
Check the sight gauge and add hydraulic fluid
(Refer to list of recommended fluids) to bring the
level up between 1/2 to 3/4 on the gauge. See
Figure MntP-0017.
BLADES
Check the Blades for cracks and wear and Blade Bolts for tightness, daily. Blades should be replaced when
they are worn excessively, bent, deformed, or out of balance.
Blades should always be replaced in pairs. Blades of different weights can cause serious
imbalance and damage to the machine and personnel. When replacing blades, take care to
replace the blade bolts, nuts, and washers.