Filter
Top Products
11
SERVICE AND ADJUSTMENTS
TO REPLACE V-BELT
FiG. 12
FiG. 11
WARNING: Shut off (disengage) the Tine
Clutch Lever, the Tiller Engine and the Tractor
Engine before making any repairs.
Replace V-belt if it has been damaged considerably from
slipping under heavy loads or if it show cracks or frayed
edges. Refer to gures 11 and 12.
IMPORTANT: Do not move or remove the belt guide.
If the position of the belt guide is accidentally altered,
return it to the correct setting (6-1/2" above the tine shield
support plate).
• Remove the screw from the top of the belt guard.
• Remove the hex nut from the rear of the guard.
• Remove the belt guard to allow access to drive belt.
• Disengage tine clutch lever and remove belt.
• Reverse above procedures for installation of new belt.