Agri-Fab 45-02181 Lawn Sweeper User Manual


  Open as PDF
of 12
 
3
HARDWARE PACK (NOT SHOWN FULL SIZE)
Ref. Description Qty.
No.
A Hex Bolt, 1/4-20 x 1-1/4" 4
B Flat Washers 1/4" I.D. 4
C Hex Lock Nuts 1/4-20 8
D Bag Rod Clips 4
E Curved Head Bolts 1/4-20 x 1" 4
F Palnut 1/4" 2
G Plastic Caps (for bag rods) 2
H Plastic Caps (for leg stands) 2
ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED FOR ASSEMBLY
(1) Phillips Screwdriver
(1) Adjustable Wrench
(1) 7/16" Open End or Box Wrench
1. Assemble the two Handle Leg Stand Tubes to the
Sweeper Housing, using two hex bolts 1/4-20 x 1-1/4"
long,atwashersand1/4-20hexlocknuts,perhandle.
Seegure1.Onlyhandtightenatthistime.
2. Assemble the Upper Handle Tube over the Handle Leg
StandTubes.Seegure2.Alignholesinhandleand
assemble the Bag Rod Clips to the handle as shown
and fasten with curved head bolts and hex lock nuts.
FIGURE 1
FIGURE 2
 previous next