Filter
Top Products
4GIWNCVQT[+PHQTOCVKQP %QORNKCPEGCPF/CTMKPIU
%QORNKCPEGCPF/CTMKPIU
+'%%QORNKCPEG
This instrument has been designed and tested in accordance with
publication EN61010-1(1993) / IEC 61010-1(1990) +A1(1992) +A2(1995) /
CSA C22.2 No. 1010.1(1993) Safety Requirements for Electrical
Equipment for Measurement, Control and Laboratory Use, and has been
supplied in a safe condition. The instruction documentation contains
information and warnings which must be followed by the user to ensure
safe operation and to maintain the instrument in a safe condition.
'NGEVTQOCIPGVKE%QORCVKDKNKV['/%
This product conforms with the protection requirements of European
Council Directive 89/336/EEC for Electromagnetic Compatibility (EMC).
The conformity assessment requirements have been met using the
technical Construction file route to compliance, using EMC test
specifications EN 55011:1991 (Group 1, Class A) and
EN 50082-1:1992.
In order to preserve the EMC performance of the product, any cable
which becomes worn or damaged must be replaced with the same type
and specification.
Refer to the Declaration of Conformity on page 41.
5CHGV[
This instrument has been designed and tested in accordance with
publication EN61010-1(1993) / IEC 1010-1(1990) +A1(1992) +A2(1995) /
CSA C22.2 No. 1010.1(1993) Safety Requirements for Electrical
Equipment for Measurement, Control and Laboratory Use, and has been
supplied in a safe condition. The instruction documentation contains
information and warnings which must be followed by the user to ensure
safe operation and to maintain the instrument in a safe condition.
E4416-90002.book Page 38 Wednesday, October 25, 2000 6:22 PM