2
Installation Guide
Installation Instructions
Installation Instructions
This plug-in module is designed for use with the Infiniium DCA Agilent
86100A/B wide-bandwidth oscilloscope.
To install the module into the Infiniium DCA
1 Slide the module into an available front-panel slot.
You can remove or install a module while the instrument is in operation.
2 Finger tighten the two knurled screws on the module’s front panel.
Up to two modules can be inserted into the Infiniium DCA. All documentation
(including specifications) for this plug-in module is located in the Infiniium
DCA built-in information system (online help). To access the online help,
touch or click Contents on the Help menu.