Filter
Top Products
• Use room-temperature water. Very hot or very cold water will hurt your plants.
• We recommend using municipal tap, bottled or purified water. Well or softened water
SHOULD NOT be used because the extra minerals in these sources may be harmful to
aeroponically grown plants.
!
12
Add Water
There should always be water in the Bowl of your AeroGarden. Using a spouted container, pour water into
front of Bowl where “Fill To Here” is indicated. Always add water when “Water Low” light illuminates.
Every two weeks, “Add Nutrient” and “Water Level Low”
lights will blink. At that time:
Unplug AeroGarden.
Remove Bowl from Base and bring it to a sink.
Remove Tray from Bowl and place on a counter that
can get wet.
Empty contents of Bowl into sink
and rinse Bowl. (Use
water only.)
Fill Bowl with room-temperature
water up to “Fill to
Here” and set Bowl on counter.
Place Tray back on Bowl arranging roots over Cross
Beams (if present).
Carefully replace Bowl on Base and plug in Garden.
First Feeding–two weeks after seeding
Add 2 nutrient tablets from “Starting Nutrients” bag,
reseal bag and press “Reset” button.
All Other Feedings
Add 2 nutrient tablets from
“Growing Nutrients” bag,
reseal
bag and press “Reset” button.
Cross
Beams
Bowl
Add Nutrients
For the first 2 weeks of growth, seedlings will derive all necessary nutrients from the Grow
Sponge. After 2 weeks, you will need to add nutrient tablets.
1
2
3
4
5
6
7
8
Tending Your Seedlings
Continued on next page