AeroGarden 100710-BLK Greenhouse Kit User Manual


 
11
Basic Reminders About Your AeroGarden
(continued)
Raise Lamp Hood (Lights)
As plants grow to 1-2” from lights, raise Lamp Arm one Locking Button at a time. Be sure Lamp Arm is
set on the lowest Locking Button when you start your AeroGarden.
Unplug AeroGarden.
1
Remove Bowl from Base.
2
Raise Lamp Arm/Lamp Hood
by holding Lamp Arm & Hood
with one hand, and pushing in
Locking Button with the other.
3
Replace Bowl on Base.
4
Plug in AeroGarden.
5
It is important to keep track of how long your Grow Bulbs have been in use and replace them every
6 months. After 6 months of use, the quality of light from the Grow Bulbs in your AeroGarden begins
to degrade. This happens with all full-spectrum fluorescent bulbs, and is a critical issue when growing
plants. In order for plants to be healthy and productive, they must receive the appropriate intensity and
spectrum of light.
How To Replace Grow Bulbs…
• Unplug AeroGarden.
• Remove old Grow Bulbs and carefully discard*.
IMPORTANT: To avoid burning, be sure Grow Bulbs
are cool before handling.
• Insert new Grow Bulbs into Lamp Hood.
• Plug in AeroGarden.
*Check with local recycling authorities for light bulb
recycling availability in your area.
Replace Grow Bulbs
Order replacement bulbs at
www.aerogardensupport.com or from your retailer.
Push Locking
Button in