Filter
Top Products
6
Set the Time, Date & Units
This rain gauge is equipped with historical data and alarms that require
accurate time and date settings to function properly. It is important to set the
time, date and units before using the rain gauge.
Press and hold the “SET” button for 3 seconds to enter SET MODE. Once in set
mode, the preference you are currently setting will blink on the display.
To adjust the currently selected (ashing) item, press and release the “+”
button (press and HOLD to fast adjust).
To save your adjustments, press and release the “SET” button again to adjust
the next preference. The preference set order is as follows:
CLOCK HOUR (note AM/PM indicators)
CLOCK MINUTE
CALENDAR MONTH
CALENDAR DATE
CALENDAR YEAR
UNITS (INCH or MM)
You will automatically exit SET MODE if no buttons are pressed for 20
seconds. Enter SET MODE at any time by pressing and holding the “SET”
button for 3 seconds.
Placement for Maximum Accuracy
AcuRite sensors are sensitive to surrounding environmental conditions.
Proper placement of both the display unit and rain collector are critical
to the accuracy and performance of this product.
Display Unit Placement
Place the display unit in a dry area free of dirt and dust.
Display unit stands upright for tabletop use or is wall-mountable.
Important Placement Guidelines
• Display unit and rain collector must be within 165 ft (50 m) of each other.
• To maximize wireless range and communication, install the rain collector
at least 3 ft (.9 m) above ground. Place both the display and the collector
away from large metallic items, thick walls, metal surfaces, or other objects
that may limit wireless communication.
• To prevent wireless interference, place both units at least 3 ft (.9 m) away
from electronic devices (TV, computer, microwave, radio, etc.)