Filter
Top Products
6
Intelli-Time
®
Clock
Intelli-Time clock and calendar are pre-programmed to the correct time and
date and update automatically for Daylight Saving Time if the Daylight Savings
Time setting is set to ON. All you need to do is select your time zone using the
“SET” mode.
Set the Time & Date
Press the “SET” button, located on the back of the display unit, to enter SET
MODE. Once in set mode, the preference you are currently setting will blink on
the display.
To adjust the currently selected (ashing) item, press and release the “
▲
” or
“
▼
“ buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the “SET” button again to adjust
the next preference. The preference set order is as follows:
TIME ZONE ( PST MST CST EST AST HAST AKST)
DST (Daylight Saving Time ON or OFF)*
CLOCK HOUR
CLOCK MINUTE
CALENDAR MONTH
CALENDAR DATE
CALENDAR YEAR
You will automatically exit SET MODE if no buttons are pressed for 30 seconds.
Enter setup mode at any time by pressing the “SET” button.
* If you live in an area that observes Daylight Savings Time, DST should be set
to ON, even if it is not currently Daylight Savings Time.
Select Degrees Fahrenheit or Celsius
Press and release the “
▼
” button while in normal display mode
(NOT in SET MODE).
Select Barometric Pressure Units in Hg or hPa
Press and release the “
▲
” button while in normal display mode
(NOT in SET MODE).