Filter
Top Products
14
Problem Possible Solution
Inaccurate
temperature or
humidity
• Make sure both the display unit and 3-in-1 sensor are
placed away from any heat sources or vents (see page 9).
• Make sure both units are positioned away from moisture
sources (see page 9).
• Make sure 3-in-1 sensor is mounted at least 5 ft off of
the ground.
• Calibrate indoor and outdoor temperature and humidity
(see page 15).
Inaccurate wind
readings
• What is wind reading being compared to? Pro weather
stations are typically mounted at 30 ft high or more. Make
sure to compare data using a sensor positioned at the
same mounting height.
• Check location of the sensor. Ensure it’s mounted a
minimum of 5 ft in the air with no obstructions around it
(within several feet).
• Ensure wind cups are spinning freely. If they hesitate or stop
try lubricating with graphite powder or spray lubricant.
Display screen
not working
• Check that the batteries are installed correctly.
Batteries may need to be replaced.
• Reset the display by pressing and HOLDING the
“CLEAR RECORD/RESET” button, located on the
back of the display unit in the battery compartment.
Date and time will need to be entered after a reset.
Troubleshooting
If your AcuRite product does not operate properly after trying
the troubleshooting steps, visit www.AcuRite.com or call
(877) 221-1252 for assistance.