3D Connexion ZT1000 Swimming Pool User Manual


 
22 Troubleshooting and Diagnostics zt1100/xz200 and xt1500 Series
Troubleshooting and Self-Repair Guide
If you cant type the euro symbol
Hold Alt GR when you press the marked key.
The euro symbol is not on the U.S. English keyboard. Make sure the embedded keypad is active
(Fn+F8) and Num Lock is on, then press and hold Alt while typing 0128 on the numeric keypad.
Support for the euro symbol requires software available from Microsoft. This software is installed
in the factory software, but may not be included with retail Windows.
If a special feature on a USB mouse doesnt work
Make sure you installed any drivers included with the mouse.
Restart the notebook, so that it will detect the mouse.
LAN Problems
If the built-in network adapter doesnt connect to the LAN
Check all cables and connections. Try connecting at a different network station, if available.
If the green light next to the LAN port does not light, the LAN cable may not be connected to the
network or the network may be down. Try connecting a different computer to the cable.
Use the networking problems troubleshooter in Windows Help and Support.
Click Start, Control Panel, Performance and Maintenance, System. On the Hardware tab, open the
Device Manager. If the network interface is disabled, try to enable it. If it has a conflict, try
disabling another device.
Click Start, Control Panel, Network and Internet Connections, Network Connections. Make sure
you have the correct clients and protocols installed.
Make sure the LAN cable is Category 3, 4, or 5 for 10Base-T operation, or Category 5 for
100Base-TX operation. Maximum cable length is 100 meters (330 feet).
If you cant browse My Network Places
Click Start, Search to look for a computer.
If you cant log in to Netware servers
If a Netware server is using IPX/SPX protocol, you may need to force your frame type to match
the servers frame type. Check with your network administrator.
If the notebook stops responding after booting
Check whether you have a TCP/IP network with no DHCP server. This can cause a long delay at
startup because DHCP is enabled. Contact your network administrator to determine the proper
TCP/IP configuration.