2Wire 94245 Lawn Mower User Manual


  Open as PDF
of 18
 
Page 15For technical questions, please call 1-800-444-3353.SKU 94245
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM
INTHISMANUALASAREFERENCETOOLONLY.NEITHERTHEMANUFACTURERNOR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE
BUYERTHATHEORSHEISQUALIFIEDTOMAKEANYREPAIRSTOTHEPRODUCTOR
THATHEORSHEISQUALIFIEDTOREPLACEANYPARTSOFTHEPRODUCT.INFACT,
THEMANUFACTURERAND/ORDISTRIBUTOREXPRESSLYSTATESTHATALLREPAIRS
ANDPARTSREPLACEMENTSSHOULDBEUNDERTAKENBYCERTIFIEDANDLICENSED
TECHNICIANSANDNOTBYTHEBUYER.THEBUYERASSUMESALLRISKANDLIABILITY
ARISINGOUTOFHISORHERREPAIRSTOTHEORIGINALPRODUCTORREPLACEMENT
PARTSTHERETO,ORARISINGOUTOFHISORHERINSTALLATIONOFREPLACEMENT
PARTS THERETO.
TROUBLESHOOTING
Symptom Possible Cause Remedy
Saw does not start when
trigger is pulled.
No power to line cord.1.
SwitchLockButtonnotpushedin2.
while pulling trigger.
Defective switch.3.
Carbon brushes dirty or worn 4.
down.
Check electrical outlet for power.1.
Press in button while pulling 2.
trigger.
Replace switch.3.
Clean or replace carbon brushes.4.
While cutting, saw slows down. Carbon brushes dirty or worn down. Clean or replace carbon brushes.
Saw blade slips while cutting. Hex Screw (42) loose. Securely tighten Hex Screw (42)
Blade Guard (20) sticks or
does not open easily.
Debris buildup in the Blade Cover
(11).
Remove Saw Blade and clean out
Blade Cover (11).
Wood burns or smokes while
being cut.
Saw Blade dull. Sharpen or replace Saw Blade.
Follow all safety precautions whenever diagnosing or servicing the tool.
Disconnect power supply before service.
 previous next