The following diagram illustrates how the Remote Transmitter controls the functions of the
system when used in the Ungo Standard Mode:
Convenience Mode
This configuration allows the MS5500 to operate with separate Arm and Disarm buttons for
greater convenience and ease of use.
Button 1 Arms the system. This Button also locks the doors when the system is in Valet Mode.
Button 2 Disarms the system. Pressing Button 2 again activates the system’s Auxiliary Function
1. This Button also unlocks the doors when the system is in Valet Mode.
If the system is Armed, pressing Button 2 will Disarm the system.
If the system is Disarmed, pressing Button 2 will activate the Auxiliary Function 1.
If the system is in Valet and the doors, pressing Button 2 will unlock the doors.
The following diagram illustrates how the Remote Transmitter controls the functions of the
system when used in the Convenience Mode:
Driver Door Priority Mode*
This configuration adds the security of unlocking only the driver’s door when the system is
Disarmed. Pressing the Disarm button again will unlock all remaining doors.
Button 1 Arms the system. This Button also locks the doors when the system is in Valet Mode.
MS5500 Owner’s Manual - Page 3
None:Green:Orange:Red:None:...
None:Green:Orange:Red:None:...
