1. Manuals
  2. Lawn and Garden Support
  3. Troy-Bilt Support
  4. Chipper Support
Support User Manuals
Question About Troy-Bilt Chipper None
How to...

I need to change the chipper blade, but can't get it apart. Does anyone have this page of the manual?

Asked by B on 10/27/2008 4  Answers

ManualsOnline posted an answer 15 years, 11 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

Dan posted an answer 15 years, 6 months ago

0 I have scanned the parts blowup and the pages for changing the chipper blade.
Was this answer helpful?

Dan posted an answer 15 years, 6 months ago

0 The instructions for changing chipper blade
Was this answer helpful?

Dan posted an answer 15 years, 6 months ago

0 i tried to post picture- it didn't work. You need to take cover off chipping unit, (4+1) wing screws) pull out the screen. Jam a wood block in wheel so it won't turn when you remove the center bolt (9/16 box wrench). There are (2) 3/8 threaded holes if you need to jack the wheel off the drive shaft. Don't lose the washers(shims) or key. I'll post another picture
Was this answer helpful?

fred posted an answer 15 years, 5 months ago

0 You have to remove the 4 bolts holding the shredder chute to the shredder housing. You then remove the 4 wing nuts on the housing for the shredder and the one wing nut on the front of the housing. You then need an allen wrench to hold the bolt from trhe chute side and a socket to loosen the 3 screws holding in the blade. You can also go to sears parts direct to download the diagram of the shredder housing
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual