1. Manuals
  2. Lawn and Garden Support
  3. Ryobi Support
  4. Cultivator Support
Support User Manuals
Question About Ryobi Cultivator 410r
Ryobi tiller 410r...

How are the gas lines run on carb. Two holes in fuel tank, two hoses to primer bulb, two hoses to carb. One hose to tank has filter, what holds the other hose in the tank?

Asked by Barry on 06/05/2010 4  Answers

ManualsOnline posted an answer 13 years, 11 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

Ken posted an answer 13 years, 11 months ago

4 Route a line from fuel fltr outlet on tank to carb inlet tube closest to muffler (brass inlet tube has 90 degree bend). Route second line from carb outlet (straight brass tube on fuel tank side of carb) to suction side of fuel primer bulb. Route third line from discharge side of primer through open (return) hole in fuel tank, ~1/2" or more into tank. If one fuel line is bad, replace all. Fuel and Air filters should be replaced when replacing fuel lines. Carb cleaning is another maintenance option.
Was this answer helpful?

rob posted an answer 13 years, 11 months ago

1 sorry i dont know as i have not got it any more, but maybe something in the manual here is the link, http://lawnandgarden.manualsonline.com/manuals/mfg/ryobi/410r.html
Was this answer helpful?

Ken posted an answer 13 years, 11 months ago

0 Industry folks call it an "interference fit". The hole in the tank has a smaller diameter than the outside diameter of the hose/tubing. Once the tubing is forced through the hole, a tight seal is created by the interference fit.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual