I had to replace my auger belts after the pulleys had come loose due to the bolt holding them had loosened and came out. But now that I have new auger belts I cannot seem to pull up enough adjustment on them to stop them from rattling and hitting the inside of the plastic cover. I have the cable adjustment tightened all the way by the auger lever control. And still I have to keep the lever depressed slightly to stop the belts from rattling and brining away at the inside of the plastic belt cover. So bottom line question is: Is there any way to adjust the auger idler pulley aside from the cable adjustment by the auger control lever? Thanks Much! -Dennis