it ran last time i started it. replaced gas linesw, now it will nnot start

Asked by wayne on 07/14/2010 3  Answers

ManualsOnline posted an answer 14 years, 3 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here
5 same problem replaced gas lines, now it will not start
Was this answer helpful?
0 Repaced gas lines and wont' start? I found that when I removed the carb plate end with the single screw(be careful there is a diagphram on the plate) there is a larger hole with a mesh filter that had become plugged. Likely with dirt from the tank when the lines disintegrated. Also used a straw to blow out the inlet to be sure it was not plugged. Started right away once primed. The clue was my pimer bulb would not fill with gas indicating a blockage.(thanks to another website commenter)
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.