1. Manuals
  2. Lawn and Garden Support
  3. McCulloch Support
  4. Chainsaw Support
Support User Manuals
Question About McCulloch Chainsaw None
primer bulb fuel line routing...

Where does the second fuel line from the primer bulb go?

Asked by Bob on 09/18/2008 4  Answers

ManualsOnline posted an answer 16 years, 2 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

Bob posted an answer 16 years, 2 months ago

5 I found the answer in another do-it-yourself forum. "You'll have a total of three fuel lines associated with this saw. The line, in the tank, with the fuel filter attached goes to the fuel pump side fitting of the carburetor. The line, in the tank, that is about only an inch or so in the tank is the return line and originates at the "out" nipple of the primer bulb. And the third and last line goes from the "in" nipple of the primer bulb to the carburetor fitting furthest away from the fuel pump side. Note that the fuel pump side of the carburetor is the side that integrates the throttle idle speed screw." That return fuel line is a booger if you don't have to replace the main fuel line. The orifice is hidden from view UNDER the hole for the main line. However, I got it replaced and the old McCulloch works fine again.
Was this answer helpful?

Bob posted an answer 15 years, 10 months ago

4 I threaded a wire through the new fuel line and pushed it into the fuel tank. Then (with difficulty) I worked the line into the tank. It's a son of a gun. My lawn mower repairman wouldn't touch it.
Was this answer helpful?

Dennis Vierra posted an answer 16 years ago

3 It was very useful! I've had a difficult time getting this information! Thanks copydesk2
Was this answer helpful?

odie posted an answer 15 years, 11 months ago

0 how did you get the lines into the tank? I cannot get the tank out to work on it. thanks
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual