1. Manuals
  2. Lawn and Garden Support
  3. Cub Cadet Support
  4. Lawn Mower Support
Support User Manuals
Question About Cub Cadet Lawn Mower RZT 50
reverse disconnect switch...

how do you disable the reverse disconnect switches so the blades do not stop?

Asked by ray mctee on 05/25/2010 32  Answers

ManualsOnline posted an answer 13 years, 11 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

bodhe posted an answer 13 years, 7 months ago

5 Once you’re done the mower will always think the left side is in forward and the pto will only be controlled by the switch, and the other safety features. if this post is super old sorry, i just did mine today and thought id share how since there is no way to find out on the web, and dealers wont tell you
Was this answer helpful?

bodhe posted an answer 13 years, 7 months ago

5 to do this you need to make the 2 electrodes inside of the plastic piece touch. i used some crumpled tin foil that i showed in there and taped in. 18-20 gauge wire should also work, i just couldn’t find a way to make it stay.
Was this answer helpful?

AL FARINA posted an answer 9 years, 10 months ago

2 DO YOU MEAN PUT A JUMPER WIRE IN TO THE PLUG?
Was this answer helpful?

bodhe posted an answer 13 years, 7 months ago

1 there are 2 switches (one for each lap bar) only one needs to be disabled. to left one is easier to do because there are fewer wires in your way. there is a plug with 2 blue wires coming out of it directly beneath the hinge that the lap bar is connected to, pull it off ( laying under the mower undo the plastic latch, and try to pull with pliers, this may take several tries and a flashlight in your mouth) once the plastic part is removed the circuit needs to be closed
Was this answer helpful?

Jason posted an answer 9 years ago

0 Heard u can just turn the plug on the switch
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual