I'm struggling to get the rear wheel off. Is it just a case for bigger hammer!

Asked by terry on 03/23/2010 5  Answers

ManualsOnline posted an answer 14 years, 8 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here
0 lever out the rubber oil seal from wheel with small screw driver then slip off wheel watching for the metal key.
Was this answer helpful?
0 This is an old K18 machine. I do not have the rubber seal, just the circlip and a washer. I can see the key and have been soaking in WD40. Have also tried heat to no avail. Thanks for you comment Terry
Was this answer helpful?
0 Does your wheel have a grease nipple on it? If so should have a seal.Will the wheel pull off alittle way and then jam? The seal can be difficult to see, and lying just inside the wheel hub best felt with a finger once the wheel is eased partly off axle. Once it's prised out the wheel slips off with the key, as is also a seal on inner lip of wheel hub which pulls out the key as the wheel comes off.
Was this answer helpful?
0 No nipple etc. Have decided to drill a couple of holes in the wheel and use a puller. Will post result.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.