Filter
Top Products
– 16 –
AE00851
CONNECTION
Alternating Current (AC)
cC
9 Be sure all electric devices including the lines
and plug connections are in good condition
before connection to the generator.
9 Be sure any electric devices are turned off
before plugging it in.
9 Be sure the total load is within generator rated
output.
9 Be sure the receptacle load current is within
receptacle rated current.
1. Wind the power lead 2 or 3 turns around frame.
å EF1600/EF2600
∫ YG2600
2. Start the engine.
761-028
q
763-095
OFF
ON
3. Plug into AC receptacle.
4. Make sure the voltage meter indicates the rated
voltage (for EF1600/EF2600) or the pilot light is on
(for YG2600).
å Voltage meter
∫ Pilot light
5. Turn the AC switch (N.F.B.) to the “ON” position
and turn on any electric devices.
1 I “ON”
cC
Reduce the load to the specified generator rated
output if an AC switch turns off. If it turns off
again, consult a Yamaha dealer.
761-029
A B
779-028
A B
7NJ-9-12A 10/27/03 10:21 AM Page 16