Filter
Top Products
4 Introduction
MAN0561 (8/25/2006)
SPECIFICATIONS
GENERAL INFORMATION
BSE4 BSE5 RBE4 RBE5
Overall Width 48" 60" 48" 60"
Weight 309 lbs. 351 lbs. 164 lbs. 180 lbs.
Cutting Edge 3/8 x 3" Welded 3/8 x 3" Welded 3/8 x 3" Welded 3/8 x 3" Welded
Moldboard
Thickness
3/16" 3/16" 3/16" 3/16"
Side Plate
Thickness
7-Gauge 7-Gauge
Scarifier Adjustable, 3-Position
with replaceable wear
points
Adjustable, 3-Position
with replaceable wear
points
Capacity 7.8 cu. ft. 9.7 cu. ft.
Tractor Rating Max. Engine 30 hp Max. Engine 30 hp Max. Engine 30 hp Max. Engine 30 hp
Tractor 3-Point Category 1 Category 1 Category 1 Category 1
Angle Adjustment
5 Forward & Reverse
Positions
5 Forward & Reverse
Positions
The purpose of this manual is to assist you in operat-
ing and maintaining your Box Scraper and/or Rear
Blade. Read it carefully. It furnishes information and
instructions that will help you achieve years of
dependable performance.
These instructions have been compiled from exten-
sive field experience and engineering data. Some
information may be general in nature, due to unknown
and varying operating conditions. However, through
experience and these instructions, you should be able
to develop procedures suitable to your particular situ-
ation.
The illustrations and data used in this manual were
current at the time of printing. However, due to possi-
ble inline production changes, your machine may vary
slightly in detail. We reserve the right to redesign and
change the machines as may be necessary without
notification.
Throughout this manual, references are made to right
and left directions. These are determined by standing
behind the tractor, facing the direction of forward
travel.
(Rev. 5/1/2009)