Filter
Top Products
Assembly 15
MAN0561 (8/25/2006)
Assemble Box Scraper
1. Place the A-frame hitch over the three
corresponding holes on the inside of the scraper
frame as shown in Figure 10.
2. Secure the hitch pin (5) with lock washer and nut.
Repeat for opposite side.
3. Finish securing the frame by installing the four sets
of bolts (10), nuts (6) and washers (7).
4. Remove lock pins (4) and scarifiers. Rotate
scarifiers so teeth face forward and replace in slots
with lock pins and safety pins.
Figure 10. A-Frame Support Bars &
Scarifiers Assembled
Figure 11. Box Scraper Assembled
DP6
5
7
6
10
4
1. Top link mount - left
2. Top link mount - right
3. Scarifier
4. 1/2 x 3" Lock pin
5. Category 1 mounting pin with nut and
lock washer
6. 3/4" Hex nut
7. 3/4" Lock washer
8. 3/4 NC x 5" Hex head cap screw GR5
9. Top link spacer
10. 3/4 NC x 2 Hex head cap screw GR5
11. Scarifier tip
6798
1
5
4
7
10
6
2
3
11