Filter
Top Products
To drain Solo model, first, shut off the power to the spa. Next, re-
move the drain cap, then open the equipment access panel and
locate the drain valve and turn handle to open.
Refer to section 13.1
(page 28).
To drain Metro and Caprio models, first, shut off the
power to the spa. Pull the external drain cap from the wood skirt
(attached to it is a drain hose) and continue pulling upward until it is
above the water line. Connect garden hose and drain spa. After
draining spa, refer to section 7.1 (page 9) for filling instructions.
10.3 Cleaning The Spa Interior
To preserve the sheen of your spa’s surface, it is crucial that you
avoid using abrasive cleaners or cleaners which have adverse
chemical effects on the surface. If you are not certain about the
suitability of a particular cleaner, please consult your authorized
Portofino dealer. Regardless of the cleanser used, use extreme
care to assure that no soap residue is left on the surface. This could
cause foaming when the spa is refilled.
10.4 Cleaning The Pillows
Remove and clean the headrest pillows as needed with soapy water
using a cloth or soft-bristle brush. To maintain water resistance and
luster, apply a quality vinyl conditioner once a month. Always re-
move the pillows when adding chemical shock treatment to the hot
tub water. The pillows can be returned to the hot tub when the
sanitizer reading drops below 5 ppm.
IMPORTANT: Never attempt to remove the pillows by
pulling on them! The pillows utilize a bolt-on design that
prohibits removal without tools.
To remove pillows:
1. Grasp center pillow insert (A) with
finger tips and gently pry outward
from pillow base (C).
2. Use a standard screwdriver to
loosen and remove mounting
bolts (B) from pillow base.
3. Assemble in reverse order after
cleaning. DO NOT overtighten
pillow mounting bolts!
20