Filter
Top Products
INSTALLATION
CHIPPER/SHREDDER VACUUM KIT
INSTRUCTIONS
MQ.
Nos. 1692210, 1692231,900OlOO
A
WARNING
Turn off the engine or motor, let the rotor come
to a complete stop and disconnect the spark
plug wire before assembling the vacuum kit or
changing
attachments.
A
WARNING
Never
remove%
adapter from the back of the
machine while the machine is running or the
rotor is turning. The rotor is
plnnlng
just Inch-
es away from the adapter inlet. Serious injury
will
result If you put your fingers or foot in the
adapter inlet while the rotor is turning!
A
WARNING
Never operate the machine without the cou-
pler/hose assembly or plug connected to the
adapter.
._.--_.
.
_-.-_.
INSTALLATION
1. Remove the rotor housing cover. Retain the screws.
2. Replace the cover with the adapter (1) using the
screws removed in step 1 and washers (6).
3. Twist the coupler (2) onto the’end of the hose (4).
1
arrows (or seams) running along the top of the cou-
pler with those on the adapter. Push
fullv
in and turn
bntil it snaps into place.
NOTE:
Insert plug (3) into adapter when vacuum
attachment is not in use. See Removing the
Vacuum Kit on the
next page.
4.Attach the leaf
tray(s)
to the hose.
7. Securely place hopper lid on hopper.
USING THE VACUUM
The vacuum kit lets you take full advantage of the vac-
uum created by the four fan blades on the rotorfly-
wheel. Placing the lid on the hopper directs the suction
Dower
to the hose inlet at the bottom of the housino.
Insert the co;pler into the adapter by aligning the
’
Ref. Qfy. Part No. Description
1A
1
1021100
Adapter
2 1
1023100
Coupler
3 1
1025100 Plug
4 1
1709540
Hose,
IO’
x
4” Dia.
5 1
1027100 Leaf Tray
6 3
1919326 Washer, Flat
7
1
5001612
Decal, Danger
6
1
1709404 Hopper Lid (Orange)
1
1019100 Hopper Lid (Gold)
1
1709467 Hopper Lid (Red)
Note: The hopper /id color depends on the mfg. no.
ordered.
rlgure
I.
nr
rane
FORM
-
1709541
PRINTED IN U.S.A.
12/93-1oo-ccI