Filter
Top Products
Installation
Instructions
Front Bumper
Mfg. No./Part No. 1695285
Axion and 150Z Series
2690642, 2690644, 2690645, 2690647
INSTALLATION
1. Attach bumper (A, Figure 2) to inside of frame (B)
securing with 5/16-18 x 7/8 capscrews (C)
and 5/16-18 flange lock nuts (D).
Figure 1. Contents
Figure 2. Bumper Installation (Footrest and Spindles
Ghosted for Clarity)
A. Bumper
B. Frame
C. Capscrews, 5/16-18 x 7/8
D. Nut, Flange Lock, 5/16-18
Kit Contents:
Ref Part No. Qty. Description
1 1733975 1 Bumper Assembly
2 1960686 4 Nut, Flange Lock, 5/16-18
3 1921333 4 Capscrew, Hex, 5/16-18 x 7/8
A
1
Before beginning any service work turn off the
PTO, set the parking brake, turn off the ignition,
remove the key, and disconnect the spark plug
wire(s).
WARNING
3
2
C
C
D
B
Note: Lift front of bumper up while tightening hardware to
prevent wheels from contacting bumper.
MANUFACTURING, INC.
500 N Spring Street / PO Box 997
Port Washington, WI 53074-0997 USA
Form No. 1734264-01
Rev. 2/2007
TP 200-4438-01-AT-SN
Briggs & Stratton Yard Power Products Group
Copyright © 2007 Briggs & Stratton Corporation
Milwaukee, WI USA. All Rights Reserved