Filter
Top Products
Engine and Frame Group with Power Boost
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
Hook one end of spring (Ref. 7)
into top hole of roller arm (Ref. 6)
and other end into top hole of
the idler arm assembly in the
Traction Drive Group.
Long hub of idler
pulley (Ref. 3) to
be toward idler
arm (Ref. 6).
Position idler pulley (Ref. 14)
at center of slot in clutch arm
(Ref. 10).
Hook one end of spring (Ref. 16)
over clutch rod assembly (Ref. 10)
between tabs and other end into
slot in frame.
Torque (4) Engine
Bolts to 17 - 21 ft. lbs.
or 23 - 29 N m
Torque to
10-14 ft. lbs. or
14-20 N m
Right rear bolt.
Position belt stops 1/16 - 1/8
from belt when auger clutch is engaged.
1
9
17
18
19
20
22
26
27
29
30
31
1432
7
6
5
2
3
4
8
8
10
13
14
15
16
46
29
54
55
56
28
44
11
12
21
40
41
23
25
24
45
47
44
45
57
58
59
3549
3550
3551
36
37
39
43
42
38
48
53
52
1433
35
34
62
61
60
986732
The above parts group applies to the following Mfg. Nos.:
2005
12
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
1694590 - 1060E
1694591 - 1170E
1694592 - 1280E
1694593 - 1390E
1694598 - 1060M
1694599 - 1170M
1694600 - 1280M
1694601 - 1390M
TP 400-4155-01-LW-S