Radio Shack 20-404 Scanner User Manual


 
©2009. RadioShack Corporation.
All rights reserved. RadioShack and RadioShack.com are trademarks used by RadioShack Corporation.
Quick Start 20-404/PRO-404
Handheld Radio Scanner
02A09
Printed
in China
GE-09D-0560
20-404/PRO-404
2 Install antenna
1 Install batteries
1
2
3
Rechargeable
batteries
Alkaline
batteries
Quick Start
User’s
Guide
Package contents
See the User’s Guide for complete instructions.
S t a r t H e re
Scanner Antenna
Rechargeable
Battery Holder
Alkaline
Battery Holder
3 Find and store frequencies
1. Press , , , , or . The service search starts in two seconds.
2. Press ENT when you find an interesting frequency (not applicable for
marine or weather service banks). The bank number and
StorE
appear.
3. If you want to change storage banks, enter the new bank number.
4. Press ENT to store the frequency. The channel and frequency flash twice.
To cancel the operation, press TUNE/CLEAR.
Program known frequencies
Refer to www.radioreference.com for a list of frequencies in your area.
1. Press PGM.
PGM
appears. Enter the channel number (1–200) where you
want to store a frequency, then press PGM again.
2. Use the number keys and • to enter the frequency.
3. Press ENT to store the frequency into the channel.
4. Press SCAN to begin scanning stored/programmed frequencies.
ENT
(Enter)
PGM
(Program)
Belt Clip