Filter
Top Products
5
WARNING
Use safety glasses or other face protection against possible battery explosion. Do not smoke
and avoid other sources of ignition.
13. Attach the positive battery cable (each end must have a rubber boot) to the positive terminal of
the solenoid and to the positive terminal of the battery Make sure these protective boots are
covering the positive terminal post on the battery and on the solenoid.
14. Connect the negative battery terminal to the battery hold down post. When finished, make sure
all wires are away from moving parts and lower engine shroud.
15. Plug cable from the spreader into socket mounted on the truck, Step 9.
!