23
REPAIR PARTS SNOW THROWER - - MODEL NUMBER PR621ES (96182000400)
SHROUD ASSEMBLY
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
KEY PART
NO. NO. QTY DESCRIPTION
1 435905X428 1 COVER.NON-DRIVE.SIDE.MS428
2 435904X428 1 COVER.DRIVE.SIDE.MS428
3 434883X421 1 TOP.COVER
4 430220 1 CAP.ASM.FUEL.2.25"FR.N/CB.E10
5 436235 1 BULB.PRIMER
6 435407 1 KEY HOUSING
7 434867X428 1 TOP.REAR.COVER
8 434873X431 1 PLATE.EXHAUST.PNT.
9 17411312 4 SCREW
10 17490412 12 SCREW.HEXWSH.THDROL.1/4-20X3/4
11 434880 1 TANK.FUEL.ASM.
12 146848 2 TIE.CABLE.24.5X.29.NYLON.WHITE
13 435529X428 1 LOWER.REAR.COVER
14 435409 2 KEY
15 196688 4 THREADED.CLIP
16 434868 3 CLIP.TRIM
17 436276 1 HDL.STARTER
18 437619 1 HEAT.SHIELD
19 438039 2 BOLT.M6X1X16MM
20 19091016 3 WASHER