Filter
Top Products
C2415M (11/99)
BK4000 Series Blower Kit
HK4000 Series Heater Kit
®
IMPORTANT SAFEGUARDS AND WARNINGS
Prior to installation and use of this product, the following WARNINGS should be observed.
1. Installation and servicing should only be done by qualified service personnel and conform
to all local codes.
2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P
enclosure, it is designed for indoor use only and it must not be installed where exposed to
rain and moisture.
3. Only use replacement parts recommended by Pelco.
4. After replacement/repair of this unit’s electrical components, conduct a resistance
measurement between line and exposed parts to verify the exposed parts have not been
connected to line circuitry.
Please thoroughly familiarize yourself with the information in this manual prior to installation
and operation.
3500 Pelco Way
Clovis, CA 93612-5699
USA
In North America & Canada:
Tel (800) 289-9100
FAX (800) 289-9150
International Customers:
Tel +1 (559) 292-1981
FAX +1 (559) 348-1120
www.pelco.com
MODELS
BK4000 Blower kit for EH4014/EH4018 Series Enclosure, 120 VAC, 4 watts
BK4024 Same as BK4000 except for 24 VAC, 3 watts
BK4220 Same as BK4000 except for 230 VAC, 4.8 watts
HK4024 Heater kit, thermostatically controlled, 24 VAC, 40 watts, for EH4014/EH4018
Series Enclosure, activates ON at 40°F (4.44°C) and OFF at 60°F (15.56°C)
HK4220 Same as HK4024 except for 230 VAC, 30 watts