Oregon 59J Chainsaw User Manual


 
58J, 58L, 59J, AND 59L CHAINS
FEATURES BENEFITS
FEATURES AND BENEFITS
CHAIN
Chisel cutters, factory ground with Superior cutting speed (nose-clear, nose-buried,
optimum angles and boring)
Smooth, easy cutting, minimal feed force required,
minimizes operator fatigue
Sharpens with a 7/32” round file Easy filing and maintenance
Depth gauge is ramp-shaped, Reduces roughness and kickback energies
and offset without affecting performance
Clean-ground gullet Maximum chip flow, helps prevent clogs from debris
No out-of-the-box filing is needed
Top-plate-angle Easy, consistent sharpening
witness mark
Lubrilink
tie straps Improved chain and bar lubrication
More oil stays where it’s needed – on the chain
The volume of oil required is reduced
Long, high-strength cutter top plate Long working life, durable, resists breakage
Made from patented OCS-01 steel-alloy Tougher than the steel on other chains, 20% tougher
material (U.S. patent no. 5,772,957) at room temperature, 125% tougher at minus 20° F.
59L F&B A107035 AB 0301
Safety/ANSI: 58J, 58L, 59J, and 59L are yellow-label chains with kickback-reducing
features. These chains do not meet the kickback requirements for low-kickback chains.
Recommended Use: Professional use by loggers and forest firefighters who prefer
large saws and .404”-pitch chain.
CHAIN PART CUTTER CUTTER KICKBACK-REDUCING
NUMBER PITCH GAUGE SEQUENCE TYPE FEATURES
58J .404” .058” Skip Chisel Ramp-shaped
58L .058” Standard
Depth Gauges
59J .063” Skip
59L .063” Standard
These new Oregon
®
.404”-pitch Super Guard
®
chains have been carefully developed to replace two
popular families of chain. Users of our previous 59LG-series and 52-series chains will find it easy to
make the switch. 58J, 58L, 59J, and 59L all feature a fast-working new chisel cutter that delivers
performance superior to its predecessors in all cutting modes. The new cutter is mounted on our
proven unequal-pitch 59 chassis for an unmatched combination of performance and durability. Oregon
®
58/59 Super Guard
®
gives professional timber cutters who use .404”-pitch chains what they want: out-
of-the-box sharpness, high performance, resistance to stretch, and consistency from chain to chain.
These chains feature ramped depth gauges to reduce kickback energies, and are recommended for
cutting clean wood with saws 4.0 cubic inches (65cc) and larger, and with bars 20" (50cm) and longer.
Because every
cut counts