NuTone 742SNNT Landscape Lighting User Manual


 
NuTone, Inc., 4820 Red Bank Road, Cincinnati, OH 45227 (1-888-543-8687)
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
Architectural & Engineering Specifications
July 2005
Decorative
Light / Fans
MODELS 742SNNT
742WHNT
742RBNT
ARCHITECT’S SPECIFICATION
Decorative Light / Fan shall be NuTone Model 742SNNT
(742WHNT), (742RBNT) as manufactured by NuTone according
to specifications listed:
Unit shall have galvanized steel housing with dual integral
mounting brackets. It shall be ducted to a roof or wall cap.
Blower assembly shall be removable and have a permanently
lubricated motor.
Light fixture assembly shall be plug-in, removable and include a
frosted melon glass shade and a corrosion-resistant base with
satin nickel (Model 742SNNT), or painted white (Model 742WHNT)
finish, or oil-rubbed bronze finish (Model 742RBNT).
Lamps shall be two 60 Watt maximum, type A, medium base,
incandescent.
Air delivery to be no less than 70 cfm and sound level no greater
than 2.0 sones. Air and sound ratings shall be certified by HVI.
Unit shall be U.L. Listed for use in insulated ceilings (Type I.C.)
50G 99043343B
SPECIFICATIONS
HVI-2100 CERTIFIED
RATINGS comply with new
testing technologies and
procedures prescribed by
the Home Ventilating
Institute, for off-the-shelf
products, as they are
available to consumers.
Product performance is rated at 0.1 in. static
pressure, based on tests conducted in AMCA’s
state-of-the-art test laboratory. Sones are a measure
of humanly-perceived loudness, based on laboratory
measurements.
DESCRIPTION
LIGHT FIXTURE:
Corrosion resistant finish
Satin nickel finish (Model 742SNNT)
Painted white finish (Model 742WHNT)
Oil-rubbed bronze finish (Model 742RBNT)
Frosted melon glass shade
Close mount design
Uses two 60 Watt maximum, type A, medium base bulbs. Bulbs
not included.
Vent openings in fixture base for exhaust fan
Light fixture assembly is plug-in and removable
BLOWER:
Plug-in permanently lubricated motor
Polymeric blower wheel
HOUSING:
Rugged, 26-gage galvanized steel construction
Sturdy key-holed mounting brackets for quick, accurate installation
Tapered, polymeric duct fitting with built-in backdraft damper for
easy, positive duct connection and no metallic clatter
NOTE: For installation in ceilings up to 12/12 pitch.
U.L. Listed for use in insulated ceilings (Type I.C.)
Use supply wiring rated for at least 90° C
VOLTS AMPS CFM SONES DUCT
120 1.6 70 2.0 4" Round
INSTALLATION
Complete installation instructions are
included with each Decorative Light / Fan.