Filter
Top Products
NuTone, Inc., 4820 Red Bank Road, Cincinnati, OH 45227 (1-888-543-8687)
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
Architectural & Engineering Specifications
July 2005
Decorative
Light / Fans
MODELS 742SNNT
742WHNT
742RBNT
ARCHITECT’S SPECIFICATION
• Decorative Light / Fan shall be NuTone Model 742SNNT
(742WHNT), (742RBNT) as manufactured by NuTone according
to specifications listed:
• Unit shall have galvanized steel housing with dual integral
mounting brackets. It shall be ducted to a roof or wall cap.
• Blower assembly shall be removable and have a permanently
lubricated motor.
• Light fixture assembly shall be plug-in, removable and include a
frosted melon glass shade and a corrosion-resistant base with
satin nickel (Model 742SNNT), or painted white (Model 742WHNT)
finish, or oil-rubbed bronze finish (Model 742RBNT).
• Lamps shall be two 60 Watt maximum, type A, medium base,
incandescent.
• Air delivery to be no less than 70 cfm and sound level no greater
than 2.0 sones. Air and sound ratings shall be certified by HVI.
• Unit shall be U.L. Listed for use in insulated ceilings (Type I.C.)
50G 99043343B
SPECIFICATIONS
HVI-2100 CERTIFIED
RATINGS comply with new
testing technologies and
procedures prescribed by
the Home Ventilating
Institute, for off-the-shelf
products, as they are
available to consumers.
Product performance is rated at 0.1 in. static
pressure, based on tests conducted in AMCA’s
state-of-the-art test laboratory. Sones are a measure
of humanly-perceived loudness, based on laboratory
measurements.
DESCRIPTION
LIGHT FIXTURE:
• Corrosion resistant finish
Satin nickel finish (Model 742SNNT)
Painted white finish (Model 742WHNT)
Oil-rubbed bronze finish (Model 742RBNT)
• Frosted melon glass shade
• Close mount design
• Uses two 60 Watt maximum, type A, medium base bulbs. Bulbs
not included.
• Vent openings in fixture base for exhaust fan
•
Light fixture assembly is plug-in and removable
BLOWER:
• Plug-in permanently lubricated motor
• Polymeric blower wheel
HOUSING:
• Rugged, 26-gage galvanized steel construction
• Sturdy key-holed mounting brackets for quick, accurate installation
• Tapered, polymeric duct fitting with built-in backdraft damper for
easy, positive duct connection and no metallic clatter
NOTE: For installation in ceilings up to 12/12 pitch.
U.L. Listed for use in insulated ceilings (Type I.C.)
Use supply wiring rated for at least 90° C
VOLTS AMPS CFM SONES DUCT
120 1.6 70 2.0 4" Round
INSTALLATION
Complete installation instructions are
included with each Decorative Light / Fan.