Northern Industrial Tools M1107C Log Splitter User Manual


 
Splitting Operation
18
WARNING
Before starting this log splitter, review the following instructions and safety information for
safe operation of the log splitter.
Failure to follow these rules may result in serious injury to the operator or bystanders from
moving parts that crush, cut, or entangle, from flying objects, burns, fire, falling or tripping, or
from carbon monoxide poisoning.
General safety information:
Read manual. Do not allow anyone to operate the log splitter who has not read the Owner’s Manual
or has not been instructed on the safe use of the splitter. The log splitter owner should instruct all
operators in safe log splitter operation.
Age restrictions. Never allow anyone under 16 years old to operate the log splitter. Children 16
years and older must be trained and supervised by a trained adult.
Intended use. Log splitters should only be used for splitting wood logs, lengthwise with the grain.
Do not use for other purposes as unforeseen hazards may result.
Modifications. Never modify or alter the log splitter in any way. Modifications can create serious
safety hazards and will void the warranty:
Attachments. Never add attachments to the splitter, except for authorized accessories supplied
by the manufacturer with instructions for safe installation and use.
Engine speed. The maximum engine speed is preset at a safe limit. Never attempt to modify the
engine speed setting to run at a higher speed.
Fuel/exhaust system. NEVER modify or add to the exhaust system, fuel tanks, or fuel lines.
Fire can result.
Remote control. NEVER attach a rope, cable, or other remote device to the splitting control.
Splitting wedge. NEVER attempt to change the height or speed of the splitting wedge.
Pressure setting. NEVER increase the pressure setting of the pump or control valve.
Safety equipment / controls. Always operate the log splitter with all safety equipment in place and
in good working order, and all controls properly adjusted for safe operation.
Know how to stop. Be thoroughly familiar with all controls and with the proper use of the
equipment. Know how to stop the log splitter and relieve system pressures quickly if needed.
Operating speed. Always operate the log splitter at the manufacturer’s recommended speed. The
maximum speed of the engine pump and wedge are preset within safe limits.
Daylight only. Only use the log splitter in daylight so you can see what you are doing.
Smoking / sparks. Never smoke while operating the log splitter, and never operate near sources of
sparks or flames.
Under the influence. Never operate, or let anyone else operate, the log splitter while under the
influence of alcohol, drugs, or medication.
Unattended. Never leave the machine unattended while the engine is running.
Refueling. Never refuel the engine until it has cooled at least two minutes.
Adjusting / repairing. Always make sure the engine is off before cleaning, repairing or adjusting
the splitter, except as recommended by the manufacturer. In addition, disconnect the spark plug and
move all control handles back and forth to relieve system pressure before changing or adjusting
hydraulic system components such as hoses, tubing, fittings or other components.
Replace labels. Always make sure safety labels are in place and in good condition. If a safety label
is missing or not legible, order new labels because unsafe operation can result. Call 1-800-270-0810
to order new safety labels.