Open as PDF
MITSUBISHI MGS SERIES
DIESEL GENERATOR SET
POWER RATING (0.8 P.F.) MODEL CODE
STAND-BY 2012 kW 6S-7PF
PRIME 1820 kW 6P-7PF
MGS2500B with typical options
■ Standard Voltage 3Phase 4 Wires
■ Voltages Available 3Phase 4 Wires
480, 460, 450, 440 and 416V
Note: Outputs for optional voltages may differ from standard output mentioned above.
CONDITIONS & DEFINITIONS
Stand-by: Code: S
Applicable for supplying emergency power at varying load in the event of the normal utility power interruption.
Fuel stop power in accordance with ISO15550, ISO3046/1, JISB8002-1, DIN6271 and BS5514.
Overload: not allowed
Prime: Code: P
Applicable for supplying emergency power at varying load in the event of normal utility power interruption. + 10% overload
in accordance with ISO3046/1. Overload power in accordance with ISO15550, ISO3046/1, JIS8002-1, DIN6271 and
Engine ratings are based on SAE J1349 standard conditions and also apply at ISO3046/1, DIN6271 & BS5514 standard
Fuel rates: based on ASTM D975, BS2869 and on fuel oil of 35° API (16°C or 60° F) gravity having a LHV of 42,780 kJ/kg
(18,390 Btu/lb.) when used at 29°C (85° F) and weighing 838.9 g/liter (7.001lbs./U.S. gal.).
Note: * For conditions of prime power (P.R.P.) and additional rating requirements, please consult your nearest Mitsubishi
DIMENSION (Reference Data)
L : Length
W : Width
H : Height mm 3460
Total Weight (Dry)
Total Weight (Wet)