Filter
Top Products
32
Section 7: Features & Benefits
RCD1884 Rotary Cutters 326-355M
12/15/15
Table of Contents
Section 7: Features & Benefits
RCD1884 Model
Features Benefits
Surpassed rugged
industry standards
All Land Pride Cutters have been designed and tested and meet rigorous voluntary
testing procedures specified by ANSI.
5 Year gearbox warranty Shows our confidence in the gearbox integrity.
Gearbox Seal Protection Gearbox bottom seal protection for longer bearing life.
Cat. 3 main driveline with
2-plate slip-clutch
2-Plate slip-clutch protect driveline and gearboxes. slip-clutch is more convenient
than shear bolt for continual work.
Shock absorbing flex-coupler between
main and side gearboxes
Protects intermediate drive shaft and side gearbox from hard objects in the blade
path.
10" Deck offset to the right
Allows the operator to cut closer to bodies of water, drainage ditches, roadways
and objects such as fence lines, guard rails, buildings, and trees.
Lower clevis type 3-Point hitch
Allows for ease of hook-up to tractor. Also adds additional strength allowing for an
even pull from the tractor’s lower arms, vs. pulling on a single pin design.
Smooth deck top Reduces accumulation of debris and is easier and faster to clean.
Fully welded 10 gauge deck
Fully welded deck adds additional strength to the deck.
10 Gauge decks can withstand more abuse than decks with lighter gauge.
Box tubing deck supports Makes for a stronger rigid deck.
Round back design Helps discharge grass better than enclosed or partially enclosed cutters.
11 5/8" Deck Height Allows cutter to handle heavy cutting conditions.
1 1/2" to 12" Cutting height Provides for a wide range of cutting conditions.
Skid shoes Provides sidewall reinforcement and protection to bottom of sidewall.
1/2" x 4" Heat-treated
free swinging blades
Free swinging protects from obstructions. Heat-treated offers longer life.
1/2" x 4" Blade bar Heavy-duty blade bar adds support to stump jumper and gearbox output shaft.
Splined blade bar hub Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
Stump jumper Standard round stump jumper slides over stumps, rocks, and debris.
Front and rear guarding Protect against flying debris.
Optional front rubber or single chain guarding.
Standard rear metal band or optional rear extended metal guarding.
Optional 15" Laminated tailwheel
4" x 16’ Molded rubber
Laminated material is long lasting in rough conditions and can’t go flat.
Can’t go flat.