Filter
Top Products
21
Box Scrapers
Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.
MRL35, HRL35 & HR35 Series Retractable Box Scrapers
19” Lowback 24” Highback
MRL3572 HRL3578 HR3584
Working Width 72” 78” 84”
Capacity 23 cu. ft. 26 cu. ft. 31 cu. ft.
Weight (Pounds) 931 972 1117
Weight (with hydraulics) Not Applicable 981 1119
Number of Shanks 88 8
Shank Material 3/4” x 2 1/2” heat treated spring steel
Shank Penetration 3- positions (1”, 3” & 5” below scraper end plates)
Shank Tip Construction Replaceable heat treated dimpled-on tips
Shank Beam Pivots to lift shanks up; transport lock on shank tube
Lift Mechanism Manual lever w/ spring assist Hydraulic cylinder Hydraulic cylinder
Moldboard Roll-Formed Moldboard -17” Roll-Formed Moldboard - 23”
Side Panels 1/2” thick x 19” high x 30” deep 1/2” thick x 24” high x 30” deep
Depth of Bucket 28” 27 1/2”
Cutting Blades 2 ea. 1/2” x 6” high carbon, heat treated cutting edges; reversible and replaceable
Maximum H.P. Rating 65 HP
3-Point Hitch Construction Harden bushings in upper and lower hitch points
3-Point Hitch Type Category l & II
305-054S
2/21/09
MRL3572 Not Shown
26995