Filter
Top Products
18
Disc Harrows
Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.
DH35 Series
Description DH3510 DH3512
Drawbar Horsepower Requirement 45-75 hp 55-80 hp
Side Mainframe Construction 3" x 4" x 3/16" Wall tubing w/gusset
reinforcements
3" x 4" x 3/16" Wall tubing w/gusset
reinforcements
Max. Cultivation Width 10’- 6" Approx. 12’-0" Approx.
Transport Width 10’ -10" Base Unit 12’-4" Base Unit
Number of Bearings 12 for all Ten Foot Disc Configurations 12 for 9" Disc Spacing
16 for 7.5" Disc Spacing
Approx Weight Per Blade
with 7.5" Spacing
79 to 84 lbs 76 to 82 lbs
Approx Weight Per Blade
with 9" Spacing
87 to 93 lbs 81 to 86 lbs
Hitch Type Pull-type w/clevis & hole for 1 1/4" pin
Hitch Frame Construction 3"x 3" x 1/4" Wall tubing w/hose carrier and jack mount
Center Gang Beam Construction 4"x 3" x 1/4" Wall tubing
Gang Swing Arm 4"x 3" x 1/4" Wall tubing
Main Frame Front Tube 5"x 3" x 1/4" Wall tubing
Mainframe Width 93"
Disc Size Selections 20" or 22" Notched or Smooth
Gang Axle Construction 1 1/8" Square Hi-strength Steel
Disc Bearings Greaseable & Triple Sealed Ball Bearings
Disc Spacing Choices 7.5" or 9"
Forward Gang Angle Adjustment Single Pin Adjustment to 15, 16 1/2, 18, 19 1/2 or 21 degrees
Rear Gang Angle Adjustment Single Pin Adjustment to 12, 13 1/2, 15, 16 1/2 or 18 degrees
Front to Rear Leveling System Manual crank
adjustment
Depth Control Cylinder stroke control spacers
Hydraulic Cylinder
for Depth/Lift Control
3"x 8" Cylinder with hoses and fittings
Transport Tires & Rims Two 9.5L x 15 Tires Mounted on 15" x 6" 5-bolt Rims
20" Rear Furrow Filler Pair Optional
18" Rear Furrow Filler Pair Optional
Disc Scrapers Optional
Center Sweep Kit Optional
Tongue Jack Optional
Dual Wheel Transport Kit Optional
322-251S continued on next page
6*05/08