La Crosse Technology Weather Radio Weather Radio User Manual


  Open as PDF
of 1
 
LA CROSSE TECHNOLOGY QUICK SET-UP INSTRUCTIONS
Please make sure that fresh batteries are installed properly in the receiver and the sensor.
IMPORTANT!! Do not set the time or press any other buttons
until the display has communicated with
the outdoor sensor for at least 10 minutes.
Use the “SET” button toggle through the menu options.
Use the “INDOOR” button to change the menu options when they are flashing.
1. Press and hold the SET button until 12h is flashing. Use the INDOOR button to select either 12h
or 24h time. Press and release the SET button once.
2. The TIME is flashing. Use the INDOOR button to adjust the hours and the OUTDOOR button to
adjust the minutes. Press and release the SET button once.
3. ** NOTE: There is only a PM display on this unit which displays under the time. If there is no
PM display, the hours are set to AM**
4. The Fahrenheit is flashing. Use the INDOOR button to select either Fahrenheit or Celsius. Press
the SET button twice to exit the set-up.