Filter
Top Products
La Crosse Technology, Ltd. Page 6
VIEW MIN/MAX:
MAX: From a normal display press and release the MIN/MAX button once to view maximum
temperature and humidity values for indoor and outdoor data. The word MAX will appear
next to the indoor and outdoor temperature.
MIN: From a normal display press and release the MIN/MAX button once to view minimum
temperature and humidity values for indoor or outdoor data. The word MIN will appear next
to the indoor and outdoor temperature.
MANUAL RESET MIN/MAX: Hold the MIN/MAX button for 5 seconds to reset all indoor and
outdoor minimum and maximum values.
TIP: When using multiple transmitters, use the CH button to view MIN or MAX temperature on
the other channels.
Heat Index/Dew Point temperature
HEAT INDEX:
Heat Index combines the effects of heat and humidity. It is the apparent temperature of how hot
it feels to a human being. As humidity increases, the body is unable to cool effectively. The
temperature will feel warmer.
VIEW HEAT INDEX: From a normal display, press the HEAT/DEW button once and Heat Index
will show instead of the indoor and outdoor ambient temperature.
Note: Heat index will be the same number as the temperature until the temperature is above 80
degrees ° F (26.7° C)
DEW POINT:
Dew point is the saturation point of the air, or the temperature to which the air has to cool in
order to create condensation. The higher the dew points, the higher the moisture content of the
air at a given temperature.
VIEW DEW POINT TEMPERATURE: From a normal display, press the HEAT/DEW button
twice and Dew Point will show instead of the indoor and outdoor ambient temperature. The
words Dew Point will show near the indoor and outdoor temperatures.
Note: Dew Point is lower than the actual temperature.
TIP: When using multiple transmitters, use the CH button to view heat index or dew point
temperature on the other channels.
Channels
The Weather Station will accommodate up to three remote outdoor transmitters. The channel
selection (CH) button on the Weather Station allows you to see the temperature in various
locations: outdoors, baby’s room, greenhouse, basement, etc.
Press and release the CH button to view channel 1, 2 or 3 on the display when multiple
transmitters are used.
Note: You cannot change channels if only one transmitter is connected.
CHANNEL SCROLL- Press and release the CH button until you see the word AUTO appear in
the outdoor data area. The display will automatically rotate through the channels for all
connected transmitters.
Press and release the CH button to lock the display into one channel.
Then view channels individually with a press of the CH button.