Filter
Top Products
La Crosse Technology, Ltd. Page 13
HOUR: The hour will flash. Press and release the +/RCC or -/°C/°F button to select the
correct hour. Confirm with the SET button and move to the next item.
MINUTES: The minutes will flash. Press and release the +/RCC or -/°C/°F button to select
the correct minutes. Confirm with the SET button and move to the next item.
YEAR: The year will flash. Press and release the +/RCC or -/°C/°F button to select the
correct year. Confirm with the SET button and move to the next item.
MONTH: The month will flash. Press and release the +/RCC or -/°C/°F button to select the
correct month. Confirm with the SET button and move to the next item.
DATE: The date will flash. Press and release the +/RCC or -/°C/°F button to select the
correct date. Confirm with the SET button and exit the program menu
Note: The Day of the Week will set automatically once the year, month and date are set.
FAHRENHEIT/CELSIUS: Press and release the -/°C/°F button once to switch from Celsius to
Fahrenheit temperature display.
No WWVB tower icon
The Weather Station has not received a WWVB time signal in the past 24-hours.
Position the Weather Station for better reception.
Be sure you have good batteries in the Weather Station or that the a/c cord is properly
attached.
Hold the +/RCC button to send the Weather Station on a signal search at night.
Allow up to 5 nights to receive the time signal.
IMPORTANT:
When operating on a/c power, the backlight and USB charging port will turn off while the
Weather Station searches for the WWVB signal, to avoid interference. The backlight will return
after the 2-10 minute search (which occurs during the late night or early morning hours). Then
the USB charging port will resume working.
USB charge port
The Weather Station has an integrated USB charging port (on back) that will charge devices
when the Weather Station is plugged into a power outlet.
Note: This is a power output (charging) port only. This port will not supply power to the
Weather Station.
You cannot use a USB cord from the Weather Station to your computer and operate the
Weather Station.
Note: There is not a USB cord included with the Weather Station.
Connect your existing USB charging cord for your external device to the USB charging
port on the back of the Weather Station to begin to charge. Charging times will vary.
Note: Check to be sure that your device will charge with the USB cord it came with. Many
USB cords are for data transfer only, and cannot be used for charging.
Output: 1A maximum current USB
Do NOT overload USB port
Note: Charging times will vary based on battery depletion and the individual device.
Note: Many devices may require more power to charge than provided by this Weather
Station.