Filter
Top Products
Model: 308-1414M www.lacrossetechnology.com/support Page | 9
Temperature Alerts
The weather station offers individual, programmable high and low temperature
alerts.
Hold the ALERT button for five seconds, until the weather station beeps, to select
and set temperature alert values. Each alert value will flash separately during alert set
mode.
REMOTE HIGH alert will flash. Press the ▼ or ▲ buttons to set the alert value, and
press the ALERT button to confirm. Then press the ALERT button again switch to
REMOTE LOW setting.
REMOTE LOW alert will flash. Press the ▼ or ▲ buttons to set the alert value, and
press the ALERT button to confirm. Then press the ALERT button again switch to
INDOOR HIGH setting.
INDOOR HIGH alert will flash. Press the ▼ or ▲ buttons to set the alert value, and
press the ALERT button to confirm. Then press the ALERT button again switch to
INDOOR LOW setting.
INDOOR LOW alert will flash. Press the ▼ or ▲ buttons to choose the value, and
press the ALERT button to confirm and exit.
Note: After selecting temperature alert values use the next step to turn individual alerts
ON or OFF.
Arm/Disarm Temperature Alerts
In normal time mode, press and release the ALERT button to toggle between:
o Remote HI
o Remote Lo
o Indoor HI
o Indoor LO
Press the ▲ button to arm the selected alert.
The alert bell appears when each alarm is activated.
Press the ▼ button to disarm the selected alert.
OFF will show in the Alerts area if no alert is active.
Temperature Alert Sounds
When temperature alert sounds, the corresponding alert bell will flash.
The alert beeps once every minute, until the temperature is out of alert range.
Press any button to stop alert. The alert bell will still show.
Disarm Alert: In normal mode, hold and release the ALERT button to select the alert
to disarm. With HI or LO alert selected, press the ▼ button disarm alert.
Adjust Backlight (HI-LOW-OFF)
When using A/C power:
Press the HI/LOW/OFF button to adjust the backlight:
When using Battery power only:
Press the HI/LOW/OFF button for 10 second backlight.