Filter
Top Products
Model: 308-1414M www.lacrossetechnology.com/support Page | 11
Mold Risk Indicator
Mold Risk is based on temperature and humidity. Monitor the mold risk for two separate
areas using the indoor weather station and multi-use remote sensor. Place the remote
sensor outdoors to monitor backyard weather conditions, or use it indoors to monitor
high mold risk areas like in a crawl space or a basement.
View Mold Risk Indoor and Remote locations: From a normal display, press the
HEAT/DEW button three times and the Mold Risk will show next to the remote and
indoor humidity.
Temperature/Humidity Trend indicators
The indoor and outdoor temperature/humidity trend indicators will update every 30
minutes or less. These trends represent temperature changes over the past three hours.
Example: At 1:00pm, the arrow indicates the change in temperature since 10:00am. At
1:30pm, the arrow will indicate the temperature change since 10:30am.
Temperature has risen in the past 3 hours.
Humidity has risen in the past 3 hours.
Temperature has not changed in the past 3 hours.
Humidity has not changed in the past 3 hours.
Temperature has fallen in the past 3 hours.
Humidity has fallen in the past 3 hours.
Search for Remote Sensor
Hold the HEAT/DEW button to search for the remote sensor.
The strength signal icon will animate until the sensor signal is received or
for 3 minutes if no signal available.
MIN/MAX (View, Reset)
The Weather station provides the daily minimum and maximum temperatures
each day starting at midnight (12:00 AM). The Weather station automatically
resets the min/max temperatures at midnight (12:00 AM).